The only thing that you will see the above do is the prints unless you have something listening on 127.0.0.1 port 5005 as you are sending a packet not receiving it - so you need to implement and start the other part of the example in another console window first so it is waiting for the message. ![]() put things in brackets () after print statements. If you are running python 3 then you need to change the print statements to print functions, i.e. That being said, here's the output that I see when I run your script, while having netcat running. Using netcat, I can do nc -ul 127.0.0.1 5005 which will listen for packets at: I'm verifying this by using netcat on Linux. ndto(bytes(MESSAGE, "utf-8"), (UDP_IP, UDP_PORT)) Sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) # UDP Try this: print("UDP target IP:", UDP_IP) You are right that this would work for Python 2x since in Python 2x, ndto on a socket takes a "plain" string and not bytes. Over the network you need to send bytes and not characters. You would have to encode the string as bytes. Now, while the script is running, follow the steps in Set the IP Address to Test Computer.With Python3x, you need to convert your string to raw bytes. The python script stops printing results, because it never sees the broadcast UDP packet. Set the variable to some address on your network other than your test computer. Set IP address to Target Other than Test Computer The python script continues to print the same result as in the previous step. The module can be configured to send the broadcast UDP packet to a fixed IP address other than the broadcast address of 255.255.255.255.Īt the Gecko OS prompt, enter the following command to set the target IP for the broadcast UDP packet. Note that only the mac (module MAC address) and ip (module IP address) properties are broadcast. The python script now prints text similar to: Listening for Gecko OS device broadcast UDP packets. Reboot to restart the periodic broadcast service Set broadcast properties to IP and MAC address IP found in broadcast UDP packet: 192.168.1.173Ĭhange Properties in Broadcast UDP PacketĪt the Gecko OS prompt, enter the following command to change the properties in the broadcast UDP packet: Module Gecko OS Commands We will use the socket module, which comes built-in with Python. Within the broadcast interval of 2 seconds, the python script prints a result similar to the following: Broadcast UDP Packet (json format): On the other hand, the client will try to connect to the server and send a file of any type. The script displays the following text: Listening for Gecko OS device broadcast UDP packets. Run Python ScriptĮxecute the broadcast_udp_packet.py python script. The Python script listens for UDP packets and validates any packet. The module automatically broadcasts UDP packets every 2 seconds after association to an AP has completed. This application note demonstrates how to send and receive a broadcast UDP packet. Reboot to restart the periodic UDP broadcast service Issue the following commands to join the network automatically and reduce the broadcast interval to 2 seconds: Module Gecko OS commands ![]() To associate the module to a Wi-Fi network, set the values of wlan.ssid and wlan.passkey and run the network_up command. To open a Gecko OS terminal connection to the Gecko OS device, see Getting Started. To break out of the Python script loop, press Ctrl-C (Command-C on a Mac.) Method Open a Gecko OS Terminal to the Gecko OS device
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |